[SGVLUG] Electrical Tape!! Re: Buying a spool of ethernet wire - cat5e or cat6? Copper or aluminum? Where? How much?

[Dan Buthusiem]

Sign me up, as long as it's not next Saturday.
On Aug 3, 2012 3:26 PM, "matti" <mathew_2000 at yahoo.com> wrote:

> Hi Dan,
>
> --
> So, what are good patch panels to buy?
>
> 24 port cat 6:
> http://www.computercablestore.com/24_Port_CAT6_Rack_Mount_P_PID48062.aspx
> 24 port F coax:
> http://www.computercablestore.com/24_Port_Fully_Loaded_F_Ty_PID49363.aspx
> Brackets:
> http://www.computercablestore.com/2U_Wall_Mount_Brackets_catID2078.aspx
> ---
>
> Brackets, you don't really need those.
> Last job I just used some wood blocks to make
> stand offs. ( we can use 2x4s )
>
> --
> > Do you know where you want to mount the wifi routers/aps?
> > ( maybe at the stairwell area? )
>
> I might cheat and just plug them in to one of the wall plates
> we'll be installing.  For the ground floor service, might try
> putting one in the basement instead of on the ground floor.
> ---
>
> The basement should work really well for the ground floor,
> and maybe then one in the attic ( again we need to get power to it )
>
> hmmm, I am guessing if we put one right above the stairwell, either
> on the ceiling or maybe even in the attic we maybe able to get
> enough coverage for the interior.
>
> thanks
> matti
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.sgvlug.net/pipermail/sgvlug/attachments/20120803/31797f77/attachment.html