[SGVLUG] SGV Linux Users Group Monthly Meeting: Thursday, August 11 · 6:45 PM PST

[R Scobey]

Thank you!

> On Aug 11, 2022, at 12:03 PM, Lan Dang via SGVLUG <sgvlug at sgvlug.net> wrote:
> 
> I dont think we have an easy way to record the meeting.  We used to do cell phone or camcorder recordings for in-person meetings  but we would have needed some lead time to set that up.
> 
> Lan
> 
> On Thu, Aug 11, 2022, 10:53 Braddock Gaskill via SGVLUG <sgvlug at sgvlug.net <mailto:sgvlug at sgvlug.net>> wrote:
> Eating is not mandatory, but most people order something.  The food comes before or during the presentation, it is only a little distracting.  You don't need to come particularly early to order.  The presentation usually starts around 7:15 pm.
> 
> I don't think anyone plans to record the session tonight.
> 
> -braddock
> 
> On Thu, Aug 11, 2022 at 10:38 AM R Scobey via SGVLUG <sgvlug at sgvlug.net <mailto:sgvlug at sgvlug.net>> wrote:
> Does everyone eat during the meetings, or do you need to come earlier if wanting to?
> Any chance this will be recorded tonight?
> 
> Richard Scobey
> 
>> On Aug 7, 2022, at 9:42 PM, Nick Hyde via SGVLUG <sgvlug at sgvlug.net <mailto:sgvlug at sgvlug.net>> wrote:
>> 
>> SGVLUG: In Person Meeting Talk on FreeCAD for Noobs
>> 
>> Speaker:
>> Scoops
>> https://hackaday.io/scoops <https://hackaday.io/scoops>
>> 
>> Subject:
>> FreeCAD for Noobs
>> https://www.freecad.org <https://www.freecad.org/>
>> FreeCAD is a parametric 3D modeler and is very useful for 3D printing. Scoops will give an introduction to FreeCAD for complete beginners, and he'll show a few of the workbenches, go through modeling showing some simple shapes (enclosures and basic parts), and touch on some gear creation. Moreover, he'll do a demo of FreeCAD 0.20, if you'd like to follow along.
>> 
>> 
>> About the Speaker:
>> Scoops is a software engineer by day, but a compulsive tinker by night. He picked up 3D printing during the pandemic to keep his sanity.
>> 
>> Agenda:
>> 6:45 - Socialize with members
>> 7:05 - Announcements
>> 7:15 - Talk start -- FreeCAD for Noobs
>> 
>> Venue:
>> Thursday, August, 11th at 6:45 pm at IHOP in Pasadena on Arroyo Parkway come listen to a talk about FreeCAD, chat with old friends, and find fresh faces at our in person meeting. 
>> 
>> 
>> ---- SGVLUG is one of the oldest and most active Linux User Groups in the Greater Los Angeles area. In addition to Linux, the group also shares interests in other free and open source software, all forms of technology, and the discussion of issues that arise with the these new tools, such as privacy rights. SGVLUG attracts members from throughout LA County including Pasadena, Glendale, Burbank, and eastward throughout the San Gabriel Valley. Our members include software developers, system administrators, hardware engineers, and software users of all levels of experience. Many work in the technology field as employees, contractors or consultants, and enjoy the learning and networking opportunities available from the group. We also have many members that serve as volunteers of their time and skills at various local events, including the annual Southern California Linux Expo (SCaLE).
>> 
>> We're looking forward to seeing everyone again at the IHOP in Pasadena at 880 South Arroyo Parkway, Pasadena, California 91106. We'll be in the back room.
>> 
>> 
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://sgvlug.net/pipermail/sgvlug/attachments/20220811/4b19db57/attachment.htm>